Quote

Tennis Court LED Lights

Meeting Australian Standards: AS2560.2.1

The main objective when lighting outdoor tennis courts is to not only provide an even spread of light but to maximize the lux levels at 1m above the court where the action mostly happens. Asymmetric beam floodlighting is essential to reduce glare and ensure uniformity levels are as high as possible.

The Australian Standards for outdoor tennis court lighting AS2560.2.1 specifies 250 lux average as the minimum required level of lighting to ensure a game of tennis can be played safely and comfortably.

See below uniformity and glare requirements to meet the Australian Standard.
Instant On
Superior Design
90% Less Maintenance
Up to 65% Power Saving
Remote Control System
Australian Made
Checklist
Specifications & Data Table
Lighting Templates & Downloads

Important Points to Check When Upgrading Your Tennis Court Lighting

Here are some of the frequently asked questions and answers about upgrading to LED lighting.
Are your existing poles up to handling the weight? If not, choose your lights with care to make sure they are the same or similar to the lamps being replaced.
If replacing the poles, ensure the installation is in accordance with council requirements and look into the warranties.
Have you checked existing lux levels and cross referenced the new plan to see what advantage there will be?
Has the lighting supplier proved that the uniformity and lighting levels will comply with the standards?
Have you achieved a power-usage advantage or would staying with your old MH fittings be more economical?
Go back to view all sports lighting regulations
Lights for soccer field
Comparison of 360 Lux (above) & 110 Lux

Lighting Regulations Data Table

Here are the lighting requirements for your sport.
Level of PlayMaintained Horizontal Illuminance (@1m)Maintained Horizontal UniformitiesMaximum Glare RatingMinimum Colour Rendering Index
PPATPAPPATPA
U1U2U1U2
Recreational & Residential2501500.60.30.20.15065
Club Competition3502500.60.40.30.25065
National & International10008000.70.50.50.35065
Go back to view all sports lighting regulations

Lighting Templates

The templates below allow you to get an idea of the number of lights required to comply with the standards in each category. This is a guide only and should you need a more detailed quote or assessment please fill in the Lighting Template pdf and email the completed form to estimates@legacysportlighting.com.
250/350 Lux: 4 x 7.5 Metre Poles + 4 x Legacy 320W/440W
1000 Lux: 6 x 10 Metre Poles + 12 x Legacy 640W
250/350 Lux: 4 x 12 Metre Poles + 4 x Legacy 1100W/1280W
250/350 Lux: 4 x 12 Metre Poles + 4 x Legacy 1280W/1500W
Go back to view all sports lighting regulations
Small map of australia
Australian Made
The Invictus LED luminaires are manufactured and assembled in Australia using local materials and labour.
Light weight
Lightweight & Flat Mount
The Invictus Series are constructed with extruded aluminium minimising weight. They are also designed to flat mount, resulting in minimal sail area.
Warranty
Our products are covered with a 10 year standard warranty on all Legacy hardware.
App Control & Dimmable
You can gain control of lighting levels or power usage reporting, helping you to optimise the use of the lights which also gives remote dimming which maximises power saving.
Grass court tennis courts with LED lights.

Need to learn more about LED lighting for your sporting complex or industrial area?

Get in touch to speak with one of our LED lighting experts.
Contact Us
sunbookmarkuserspower-switchleafchevron-down